JLG 3369LE Scissor Lift Financing

Thirty-three feet of platform height and a 1,000-pound capacity platform puts the JLG 3369LE in a different tier than the compact slabs. This machine runs on a low-emission dual-fuel engine (propane and gasoline), which is the spec that opens the doors the electric units cannot enter: semi-outdoor environments, partially enclosed big-box construction, distribution center shell work, parking garage maintenance. The LE designation signals indoor-capable combustion, not battery-only, giving the crew flexibility to run it in ventilated interior spaces where a full diesel scissor would fail an air quality inspection. We fund JLG lifts across the entire scissor and boom lineup, and the 3369LE is one of the machines that crosses the $50,000 threshold on its own, meaning it is a standalone fundable deal.

Contractors choosing the 3369LE are usually working at heights that exceed what a 26-foot slab electric can reach, but they need the machine to go inside at least part of the time. Steel erection crews doing bolt-up inside a pre-engineered metal building, roofing contractors running insulation board at the eave line inside a warehouse, HVAC crews doing ductwork in a distribution center shell: those are the use cases where this machine earns. If the work is strictly exterior rough terrain, the rough-terrain scissor class with foam-filled tires and high gradeability is probably the better fit, and we fund that too.

The 3369LE runs a Ford or GM four-cylinder engine configured for low-emission dual-fuel operation. Propane is the primary fuel in most configurations because it burns cleaner than gasoline and generates lower carbon monoxide levels, which is the main concern in partially enclosed spaces. That said, the machine requires meaningful ventilation for any indoor use, and operators working in fully enclosed buildings typically need an air quality plan or monitoring. The machine is not an electric unit and should not be treated as one.

Platform height is 33 feet, working height approximately 39 feet when accounting for operator reach. Platform capacity is rated at 1,000 pounds on the extension platform configuration, and the machine delivers that capacity across a deck sized for multi-person work: 46 inches wide by 96 inches long with the extension deployed. That deck footprint is substantial, which means the 3369LE also demands more attention to floor loading than a compact electric. The machine weighs in the range of 7,000 pounds, and that number needs to be checked against any elevated concrete deck or older mezzanine structure before driving on.

Oscillating axle is standard on the 3369LE, allowing each rear wheel to independently follow grade changes. That matters on outdoor terrain and on jobsites with uneven poured concrete slabs. The machine drives and levels itself without needing outriggers, which keeps setup time to a minimum on sites where the ground plane is variable. Gradeability is typically around 40 percent on the 3369LE, a significant step up from slab electrics and one of the reasons it earns on outdoor-adjacent work.

The 3369LE holds value better than compact electrics because the combustion power and extended height make it useful across more job types. That residual value is what makes a sale-leaseback particularly effective on a fleet of these machines. If you own a group of 3369LEs or similar mid-range scissors outright, we fund against the market value and put the cash back into the business while the machines stay on the yard and keep earning.

Refinancing an existing note on a 3369LE is also a clean move when rates have shifted or when the original dealer financing carried a high rate. We run the payoff, fund the difference, and reset the terms. If there is equity in the machine above the payoff, we can do a cash-out refinance and put that spread to work as operating capital. The cash-out equipment refinance structure is one of the more flexible tools in the kit for operators who have been paying down equipment for a few years.

We also fund refinancing on units that are not currently financed at all, machines bought with cash that are now sitting as unencumbered assets. If you put $45,000 into a 3369LE two years ago and the unit is running well, there is equity in that machine that can be accessed without selling it. A lot of operators do not realize that option is available. It is.

Can I use the 3369LE indoors? It runs on propane.

The 3369LE is rated for use in ventilated indoor environments. It is a low-emission unit, not a zero-emission unit, so fully enclosed or poorly ventilated spaces require an air quality plan and monitoring. Many contractors use it successfully inside distribution center shells and large commercial buildings with open loading doors or active HVAC during construction. Know your site before you drive it in.

Is the 3369LE above your $50,000 financing floor as a single unit?

A new 3369LE from a JLG dealer typically lists above $50,000, so yes. A used unit in good condition from the last few years often clears the floor as well, depending on hours and configuration. Units priced below the floor can be bundled with other equipment to meet the threshold.

How does the 3369LE compare to moving up to a full rough-terrain scissor?

The 3369LE is a dual-fuel low-emission unit with oscillating axle capability. It handles moderate outdoor terrain but is not built for the same mud, slopes, and rough conditions a dedicated rough-terrain scissor handles. If the majority of your work is outdoor uneven ground, a dedicated RT scissor is the right call. If the work splits between ventilated indoor and semi-outdoor, the 3369LE is the more versatile choice.

Can I refinance a 3369LE that I financed three years ago at a high rate?

Yes. We take out the existing note, structure new terms, and if there is equity in the machine above the payoff, we can put that cash back in your pocket through a cash-out refinance. Bring us the current payoff amount and a sense of what the machine is worth and we will show you what the deal looks like.

My operation runs outdoors most of the time. What is the right alternative to the 3369LE?

For full outdoor rough-terrain work, look at the JLG rough-terrain scissor models or the Genie GS-4390 RT for a diesel option with true RT capability. We fund those on the same application-only structure up to $400,000. Tell us the height and terrain requirements and we will point you at the right machine for the deal.